Updated: 17 November 2026
The SAP HANA administration certification, C_DBADM (SAP Certified - Database Administrator - SAP HANA), is one 3-hour system-based task with a 73% pass score. Its four topic areas are written in cloud terms: SAP Business Technology Platform (SAP BTP) setup, provisioning, user management, and high availability and disaster tolerance. If your experience is SAP HANA on-premise, this guide shows what changes and where your existing skills still count.

What is the SAP HANA administration certification in 2026?
C_DBADM is SAP's database administrator certification for SAP HANA. It is a system-based assessment (SyBA): one activity in a live system, 3 hours, 73% to pass, offered in English. It covers SAP HANA Cloud and SAP HANA on-premise databases.
These figures come from SAP's C_DBADM certification page, checked on 17 November 2026. The page says the exam "validates that you possess the essential database administration skills required for managing SAP HANA Cloud and SAP HANA on-premises databases".
| Exam fact | Value on SAP Learning (17 Nov 2026) |
|---|---|
| Code | C_DBADM (no version suffix) |
| Assessment type | System Based, 1 activity |
| Duration | 3 hours |
| Pass score | 73% |
| Topic areas | Configure SAP BTP 21-30%, Provisioning SAP HANA 21-30%, User Management 21-30%, Increase HA and DT 11-20% |
| Language | English |
| Preparation | Learning journey with a practice system |
SAP's page still mentions a beta of SAP Joule for Consultants as an open-book exam resource, with a beta period that ended on 29 October 2026; the page does not say what applies now. Check it on the day you book.
What do the four C_DBADM topic areas ask you to do?
The four areas map to four kinds of work: setting up the SAP BTP side, creating and running the database, managing users and roles, and adding resilience. Three areas carry 21-30% each; high availability and disaster tolerance carries 11-20%.
HA and DT is SAP's short label. SAP's own lesson on increasing resilience says it teaches "how to increase high availability and disaster tolerance" of an SAP HANA Cloud database, which matches the label. That lesson also frames the business case: going beyond the default SAP BTP System Availability service level agreement (SLA) of 99.7%.

Read the topic names closely. This guide's reading: Configure SAP BTP has no on-premise counterpart. SAP publishes no sub-topics for it, but in the HC200 lessons the SAP BTP-side settings are the subaccount and its region, the availability zone, the allowed IP addresses and the Cloud Connector. An on-premise DBA who has never opened the SAP BTP cockpit will likely find this area the least familiar, and it can carry up to 30% of the result.
What changes when SAP HANA runs in SAP HANA Cloud?
The biggest change is ownership. In SAP HANA Cloud, SAP installs the software, connects the tools and runs the backups. You provision, size, place, secure and protect the instance. The SQL skills for users and roles carry over almost unchanged.
SAP's learning journey for this exam has three courses and asks for basic Linux and database knowledge. Two of them describe the two worlds side by side: HC200 for SAP HANA Cloud (16 hr 15 min, 9 units) and HA200 for SAP HANA on-premise (20 hr 1 min, 12 units). The third, HA2HC on migration, takes 1 hr 20 min. That is about 37.5 hours of course time in total.
The table below is built from those course lessons. It pairs each task with what you did on-premise and what you do in the cloud. The last column is this guide's own mapping, because SAP publishes only the topic area names.
| Task | SAP HANA on-premise (HA200) | SAP HANA Cloud (HC200) | Closest topic area |
|---|---|---|---|
| Get a database | Install with hdblcm, then install SAP HANA cockpit | Provisioning Wizard in SAP HANA Cloud Central, or cf create-service |
Provisioning SAP HANA |
| Decide where it runs | Your own hosts | Region per SAP BTP subaccount (fixed once chosen), zone automatic or manual | Configure SAP BTP |
| Who can connect | Your network rules | BTP IPs only, all IPs, or listed IP ranges; optional Cloud Connector | Configure SAP BTP |
| First admin user | SYSTEM in each database | DBADMIN (SYSTEM is reserved for SAP) | User Management |
| Backups | You create or schedule them | SAP runs them; you verify them and set retention | Increase HA and DT |
| Standby copy | Not a unit in HA200 | Up to two replicas, set in the wizard or later | Increase HA and DT |

SAP has described this shift for years. Irfan Khan, then president of SAP HANA Database & Analytics, said in an April 2021 announcement (TelecomTV's repost of SAP's release): "As our customers move or extend their landscapes into SAP HANA Cloud, they can expect faster provisioning, elastic and scalable cloud qualities, a fully managed database-as-a service, hardware infrastructure and consumption-based pricing."
Fully managed is a useful lens for the topic list. This guide's reading: it is a likely reason the exam has no installation topic area, and why backups are best studied as part of HA and DT rather than as a separate skill.
What happens in the SAP HANA Cloud provisioning wizard?
Provisioning is the cloud version of installation: a six-step wizard in SAP HANA Cloud Central. You choose a configuration type, name the instance, set the DBADMIN password, pick memory, place the instance in a zone, add replicas and set connections.
SAP's provisioning lesson lists what the wizard creates for you. You get an instance with data-at-rest encryption, the DBADMIN user, connections to SAP HANA Cloud Central, cockpit and database explorer, and a backup cycle of 14 generations with an initial backup. You can install the current quarterly release or one of the two before it.
Three details in that lesson are easy to miss in a timed task:
- The vCPU count is not set by hand. It follows from the memory you request and the performance class.
- The DBADMIN password expires after 180 days under the default security settings.
- In a trial account, memory and storage are fixed at 16 GB and 80 GB.
On-premise habits can mislead you here. The instance name can be 1 to 63 characters and is not a three-character system ID, and there is no SYSTEM user to log on with.
How do you choose replicas for high availability and disaster tolerance?
Pick replicas from two requirements: how much data loss is acceptable (the recovery point objective, RPO) and whether you must survive the loss of a whole availability zone. SAP HANA Cloud allows at most two replicas within a region, and the trial and free tier offer none.
SAP's resilience lesson describes three options:

Worked example. The brief: the reporting database must keep running if a host fails, with no data loss; if the whole zone fails, losing up to 15 minutes of data is acceptable; query response times must stay low.
- No data loss on a host failure points to a synchronous replica. Low response times rule out putting it in another zone, because synchronous replication across zones adds latency. So the first replica is Option 1: same zone, synchronous, automatic takeover, RPO 0.
- Surviving a zone failure with up to 15 minutes of loss points to Option 3: an asynchronous replica in a different zone, RPO 15 minutes, takeover triggered by hand from SAP HANA Cloud Central.
- That uses both of the two replicas allowed. If the brief had asked for no data loss even in a zone failure, the answer would change to Option 2 and accept the latency.
One more rule from the lesson matters in a live system. You cannot move a replica to another zone. To change the zone or sync mode, you delete it and create it again.
Who is responsible for backups in SAP HANA Cloud?
SAP is. Backups run automatically and you can't change the backup configuration. Your job is to check that the backups succeed, adjust how long they are kept, and run a recovery when one is needed.
SAP's HC200 backup lesson gives the cycle: a complete data backup every 24 hours, log and catalog backups every 15 minutes, and 14 daily backups kept by default. That gives an RPO of no more than 15 minutes. You can set retention from 1 to 215 days in the Manage Configuration app; longer retention costs more storage.

Compare that with the on-premise side. SAP's HA200 backup lesson has you create or schedule backups with SAP HANA cockpit, hdbsql or the ABAP transaction DBACOCKPIT. It recommends a complete data backup daily, or at least weekly in a 4-week cycle. In the cloud, the skill shifts from scheduling to checking. Find the Database Backups card in SAP HANA cockpit, read the Backup Generations view, and pick the right point in time for a recovery.
What does user management look like without the SYSTEM user?
You start from DBADMIN, create named administrators, then disable DBADMIN. Users go into user groups with their own administrators, and access comes from roles. The SQL is close to on-premise SAP HANA.
On-premise, the HA200 authorization lesson notes that the system database and every tenant have their own SYSTEM user. In the cloud, SAP's user accounts lesson says SYSTEM "is reserved for use by SAP" and recommends disabling DBADMIN once other administrators exist. It also warns that user groups don't control data access. Roles and privileges do.
Here is a short drill that covers the group, user and role steps in order. It assumes a SALES schema you own already exists. Run it in the SQL console of SAP HANA database explorer, then repeat it in the SAP HANA cockpit screens:
CREATE USERGROUP REPORTING_USERS;
CREATE USER RPT_ADMIN PASSWORD "<initial_password>" SET USERGROUP DEFAULT;
GRANT USERGROUP OPERATOR ON USERGROUP REPORTING_USERS TO RPT_ADMIN WITH GRANT OPTION;
CREATE USER RPT_SVC PASSWORD "<initial_password>" SET USERGROUP REPORTING_USERS;
CREATE ROLE REPORTING_READ;
GRANT SELECT ON SCHEMA SALES TO REPORTING_READ;
GRANT REPORTING_READ TO RPT_SVC;
The roles lesson adds a distinction worth practising. Catalog roles are created at runtime by a user with ROLE ADMIN and can't be transported. Design-time roles (.hdbrole files deployed through SAP HANA Deployment Infrastructure, HDI) can be transported between systems.
How should an on-premise DBA split practice time?
Split practice by the midpoint of SAP's weight ranges, then move extra hours to your weakest area. For 20 hours of hands-on practice, that means about 5.5 hours each on SAP BTP, provisioning and users, and 3.5 hours on HA and DT.
The arithmetic is simple. The midpoints are 25.5%, 25.5%, 25.5% and 15.5%, which add up to 92. Each area's share of 20 hours is its midpoint divided by 92, rounded to the nearest half hour (15.5 ÷ 92 × 20 = 3.37, shown as 3.5). This split is this guide's own planning method, not an SAP figure.
| Topic area | SAP weight | Midpoint | Share of 20 hours | What to rehearse |
|---|---|---|---|---|
| Configure SAP BTP | 21-30% | 25.5% | 5.5 h | Subaccount, region, zone, allowed IPs, Cloud Connector, instance mapping |
| Provisioning SAP HANA | 21-30% | 25.5% | 5.5 h | Wizard end to end, sizing, start, stop, upgrade, scaling |
| User Management | 21-30% | 25.5% | 5.5 h | User groups, users, roles, privileges, the SQL drill above |
| Increase HA and DT | 11-20% | 15.5% | 3.5 h | Replica decisions, backup checks, point-in-time recovery |
For an on-premise DBA, shift two hours from User Management to Configure SAP BTP. The user and role SQL will feel familiar; the SAP BTP cockpit usually won't. When you want to rehearse under time pressure, ERPPrep's C_DBADM sample questions offer free sample skill-drill questions and a sample scenario simulation to work through before the real 3-hour session.
Why does SAP put this much weight on the cloud side?
SAP describes SAP HANA Cloud as the database under its AI-native software. In this guide's view, that makes the administrator's role more important, and the topic areas fit that direction, while the on-premise course keeps the core database skills in scope.
Philipp Herzig, CTO of SAP, put it plainly in his SAP TechEd 2025 blog: "SAP HANA Cloud is the database for SAP's AI-native software architecture and the foundation of our broader data fabric strategy."
For a candidate, the practical reading is this. The on-premise course gives you the vocabulary: tenants, backup catalogs, privileges, cockpit. The exam asks you to apply it in SAP HANA Cloud Central and the SAP BTP cockpit. If you are also looking at the modelling side of SAP HANA Cloud, the C_HAMOD hands-on guide on this blog covers the data engineer exam.
Frequently Asked Questions
Q: Is the SAP HANA administration certification only about SAP HANA Cloud? No. SAP's page says it covers SAP HANA Cloud and SAP HANA on-premise databases, and the learning journey includes the 20-hour on-premise course HA200. The four topic area names, though, are written around SAP HANA Cloud tasks.
Q: What are the SAP HANA administration certification requirements in 2026? SAP's certification page names no required earlier certificate. You need a Learning Hub subscription with certification attempts and an SAP Universal ID with a secondary email. The learning journey recommends basic Linux and basic database knowledge.
Q: What score do I need to pass C_DBADM? You need 73%, according to SAP's certification page checked on 17 November 2026. The exam is one system-based activity of 3 hours, offered in English.
Q: Can I practise replicas in an SAP BTP trial account? No. SAP's resilience lesson states the replica feature isn't available in free tier or trial accounts. In a trial you can rehearse the decision logic, while the click path comes from the course demos and exercises.
Q: Does an SAP database administrator still need SQL for this exam? Yes. User groups, users, roles and privileges can all be managed with SQL statements as well as in SAP HANA cockpit. Practise both routes so a missing screen doesn't stop you.
Q: What are the best SAP HANA administration certification resources for 2026? Start with SAP's learning journey and its practice system: HC200, HA2HC and HA200. Then rehearse full tasks against the four topic areas under a 3-hour limit, using third-party practice material if you want more variety.
Key takeaways
- C_DBADM is one 3-hour system-based activity; you need 73% to pass.
- Three topic areas carry 21-30% each. Configure SAP BTP is new ground for most on-premise DBAs.
- In SAP HANA Cloud, SAP runs backups and installs the software. You provision, place, secure and protect the instance.
- Pick replicas from RPO and zone needs: at most two, none in trial accounts.
- Practise user, group and role tasks in SQL and in SAP HANA cockpit.
More SAP HANA certification guides are on the SAP HANA Central homepage.
No comments:
Post a Comment